WTB: B&M 250 thermostat housing & idler tensioner bracket spacers
02-14-2012 | 04:05 AM
#1
Thread Starter
Registered
Joined: Aug 2009
Posts: 410
Likes: 0
From: CONCORD, CALIF
WTB: B&M 250 thermostat housing & idler tensioner bracket spacers
Please help,
I'm looking for a thermostat housing / water neck for a B&M 250 blower with a bypass (if your looking at the front of it: it mounts to the front of the intake and has one long pipe on the left side, one short pipe on the right and a hole in the top of it).
I'm also looking for the 4 spacers that go between the idler tensioner bracket and the intake manifold (they are 4 1/4" long)
If anyone out in "O.S.O. LAND" might have either of these items and is willing to part with them I really would like to pick them up off of you if the price isn't to unreasonable.
Thanks, Mark
925-250-9428
I'm looking for a thermostat housing / water neck for a B&M 250 blower with a bypass (if your looking at the front of it: it mounts to the front of the intake and has one long pipe on the left side, one short pipe on the right and a hole in the top of it).
I'm also looking for the 4 spacers that go between the idler tensioner bracket and the intake manifold (they are 4 1/4" long)
If anyone out in "O.S.O. LAND" might have either of these items and is willing to part with them I really would like to pick them up off of you if the price isn't to unreasonable.
Thanks, Mark
925-250-9428
02-18-2012 | 01:14 AM
#2
Thread Starter
Registered
Joined: Aug 2009
Posts: 410
Likes: 0
From: CONCORD, CALIF
Please help,
I'm looking for a thermostat housing / water neck for a B&M 250 blower with a bypass (if your looking at the front of it: it mounts to the front of the intake and has one long pipe on the left side, one short pipe on the right and a hole in the top of it).
I'm also looking for the 4 spacers that go between the idler tensioner bracket and the intake manifold (they are 4 1/4" long)
If anyone out in "O.S.O. LAND" might have either of these items and is willing to part with them I really would like to pick them up off of you if the price isn't to unreasonable.
Thanks, Mark
925-250-9428
I'm looking for a thermostat housing / water neck for a B&M 250 blower with a bypass (if your looking at the front of it: it mounts to the front of the intake and has one long pipe on the left side, one short pipe on the right and a hole in the top of it).
I'm also looking for the 4 spacers that go between the idler tensioner bracket and the intake manifold (they are 4 1/4" long)
If anyone out in "O.S.O. LAND" might have either of these items and is willing to part with them I really would like to pick them up off of you if the price isn't to unreasonable.
Thanks, Mark
925-250-9428
