hello all. i'm in the middle of a restoration on my pantera. i did quite a bit of repair on the transom (filling holes, filled in the volvo penta cutout, etc...) and after i got done fairing it out, i shot it with a couple coats of dupont 2k surfacing primer.

did i make a mistake? it seems good but i'm worried about the epoxy reacting with the primer.

i plan on using ppg dp48lf epoxy primer on the project and top coating with dcc but i had a quart of the dupont 2k so i used it.

thanks guys.

Sorry but off topic, anymore pics of that 68' RR-1 Burgundy Metallic R/T in your avatar ?

no prob on the 2K, i do it that way all the time.

thanks dave!

hello lee. here's a couple pics of the coronet:

37,000 original miles. mostly original equipment, numbers matching, one repaint in the early nineties.

Looks beautiful !!, my favorite color on a vintage Mopar, also pretty rare with the matching interior. I had a 68 Charger R/T in the same color along with 22 other Mopars.