33 race coming back to life
#1
Thread Starter
Registered

Joined: Mar 2008
Posts: 3,307
Likes: 40
From: lockport ny
putting together an old girl!! she has the #5 gimbles and boxes on along with big shaft 4's. fresh cobra power 750's going in it tonight. its been a few years and she is finally gonna hit the water with a attitude!
#3
Thread Starter
Registered

Joined: Mar 2008
Posts: 3,307
Likes: 40
From: lockport ny
thats right about where we were thinking too. it ran 100 with beat 700's and drives with 2 differrent gear ratios side to side. lol. fresh big shaft 4's with the same gear ratio side to side now. i will post mroe pics of the progress. should hit the water in a week or so. summer is here in buffalo and a ton of work to do still. im doing a 27 fever with a 850 prob next week and i will post a thread about that too
#4
Thread Starter
Registered

Joined: Mar 2008
Posts: 3,307
Likes: 40
From: lockport ny
water pick ups and some rigging last night... still waiting for driveshafts to set the motors in.. been waiting over a week for shafts.. the marine industry has the worst shipping ever!!
#5
hope i do not sound dumb,but how much did the ext boxes raise you drives?what kind of exhaust?i am guessing headers by the height of the holes on the transome.nice looking 10meter.should hurt some feelings out on the water.
#9
Thread Starter
Registered

Joined: Mar 2008
Posts: 3,307
Likes: 40
From: lockport ny
the boxes actually dropped the drives about 1 inch which the boat needed anyway. the drives were very high before and was hard to stay hooked up in over a 2 foot chop. the boxes had 3 different mounting holes but we went with the top hole to lower the drives a touch. he has dry headers for it. should sound good with the 750's!! attempted to set the motors in last night but the driveshafts sent to us had the wrong flanges for the crash boxes and carrier bearings in the boxes. drive shafts are going to the shop today to get straightened out then doing the motors saturday morning. i hope to have them fired on saturday if all goes well. will post pics and a update soon.



i love to see these old boats come back to life,reggie produced over 10,000 boats,and i have not seen one that i didn,t like.keep us posted with your progress,im sure it will be one cool classic