Solid engine mount alignment?
05-26-2012 | 04:55 AM
#1
Thread Starter
Registered
Joined: Jun 2009
Posts: 213
Likes: 2
From: Perth, WA, Australia
Solid engine mount alignment?
Just curious.
I have solid front engine mounts in my 382 like the picture.
These bolt right up to the engines.
If the new engines need alignment for the drives, how do I do it?
I don't see where there is room to move in any direction?
The only thing I can think of is to use shims?
If that is the go - are pre-made shims available or do you have to make your own?
I have solid front engine mounts in my 382 like the picture.
These bolt right up to the engines.
If the new engines need alignment for the drives, how do I do it?
I don't see where there is room to move in any direction?
The only thing I can think of is to use shims?
If that is the go - are pre-made shims available or do you have to make your own?
Last edited by 40gt; 05-26-2012 at 05:45 AM.
05-26-2012 | 07:32 AM
#2
Thread Starter
Registered
Joined: Jun 2009
Posts: 213
Likes: 2
From: Perth, WA, Australia
Moved my question to General Boating Discussions.
http://www.offshoreonly.com/forums/g...ml#post3696009
http://www.offshoreonly.com/forums/g...ml#post3696009
