Stainless Marine BBC 2 sets exhaust, manifolds and long risers, dry to tip, like new!
06-26-2012 | 06:06 PM
#1
Thread Starter
Registered
Joined: Aug 2007
Posts: 266
Likes: 4
From: Port Deposit, MD
Stainless Marine BBC 2 sets exhaust, manifolds and long risers, dry to tip, like new!
Hi,
We are parting out our Scarab, and here is the exhaust that we had built for it by Stainless Marine. It will fit any BBC, Gen II manifolds with 4" long polished risers that extend throug the transom. They are dry to the very tip, water is mixed right at the end and they sounded great. About 30 hours of fresh water use only, and they are in excellent shape.
Still have the boxes they came in so we can ship them if necessary.
$4000 for both pairs, includes 4 manifolds, 4 risers, bolts, 4 V groove clamps, basically everything you need but gaskets.
The risers measure about 41 inches from the center of the manifold throat to the tip and the risers are about 7.5" tall from the manifold joint to the top of the bend at the highest point.
Our boat was a TRS boat with 72C trannies.
Thanks,
Brad
We are parting out our Scarab, and here is the exhaust that we had built for it by Stainless Marine. It will fit any BBC, Gen II manifolds with 4" long polished risers that extend throug the transom. They are dry to the very tip, water is mixed right at the end and they sounded great. About 30 hours of fresh water use only, and they are in excellent shape.
Still have the boxes they came in so we can ship them if necessary.
$4000 for both pairs, includes 4 manifolds, 4 risers, bolts, 4 V groove clamps, basically everything you need but gaskets.
The risers measure about 41 inches from the center of the manifold throat to the tip and the risers are about 7.5" tall from the manifold joint to the top of the bend at the highest point.
Our boat was a TRS boat with 72C trannies.
Thanks,
Brad
