The strut on the bow hatch of my h2x came off this weekend. What is the best product to use to glue it back on? I also noticed after looking at another boat I am missing the latch from the other side. Any ideas where I can find one of these and what is the best adhesive to reattach. Thanks.

I would start by looking here:

http://greatlakesskipper.com/categor...oat-hatch.html

Or here:

http://www.pompanette.com/pomp.nsf/0...400165D96?Open

I reattached my buddies on his h2x with some epoxy i bought from oreilly.. Must be plastic epoxy... 2500- 3500 psi.. Costs around $6 a tube or so.. A hardware store should have it too... Make sure to clean the old glue off real good.. Then use acetone to clean the spot you will be glueing to

Thanks everyone