-2" XR IMCO shorties, Blueprinted by Wilson Custom Marine
09-18-2012 | 05:21 PM
#1
Thread Starter
Registered
Joined: Jan 2004
Posts: 1,848
Likes: 8
From: Jacksonville FL
-2" XR IMCO shorties, Blueprinted by Wilson Custom Marine
These were bought new last summer ($3900 each), then brought to Wilson Custom Marine in november for blueprinting ($2000 each), which added 2-3 mph to my boat. Selling as a pair, and going a different route on my boat.
$6000 for the set. They have about 60 hours total on the drive.
$6000 for the set. They have about 60 hours total on the drive.
09-18-2012 | 06:38 PM
#4
Thread Starter
Registered
Joined: Jan 2004
Posts: 1,848
Likes: 8
From: Jacksonville FL
these are complete ready to bolt on, with cave plate, studs, couplers,
Gears are 1.5 ratio
XR lowers, 1.25" shaft "big shaft'
Satin finish,
Gears are 1.5 ratio
XR lowers, 1.25" shaft "big shaft'
Satin finish,
Last edited by Boomer35; 09-18-2012 at 06:48 PM.
09-18-2012 | 09:03 PM
#6
Platinum Member
Joined: May 2001
Posts: 3,358
Likes: 0
From: NO WHERE
09-19-2012 | 08:07 AM
#7
Platinum Member
Joined: Jan 2003
Posts: 326
Likes: 0
From: lake lanier GA
09-19-2012 | 06:33 PM
#9
Registered
Joined: Oct 2010
Posts: 244
Likes: 0
Last edited by Kings11; 09-20-2012 at 03:06 PM.
