any interest in complete 460's with king cobra outdrives
#1
Thread Starter
Registered
Joined: Jan 2010
Posts: 88
Likes: 0
From: West Milton, Ohio
I have a 261 liberator I'm debating on selling whole or parting out. The motors fire right up and shift fine. They are winterized. They are around 400 hp each.
#4
Thread Starter
Registered
Joined: Jan 2010
Posts: 88
Likes: 0
From: West Milton, Ohio
Not much known about the boat...just took on trade. I fired motors right up, oil is clean and they both sound good. Drives shift smooth. Meter says 233 hrs but I'm not sure. Was told by previous owner that the motors were 390-400 hp but i also am unsure what has been done. Sorry I'm a chevy/merc guy so I don't know alot about the ford/omc
#6
Thread Starter
Registered
Joined: Jan 2010
Posts: 88
Likes: 0
From: West Milton, Ohio
The whole boat is on ebay right now starting at 5k which i think is a good deal including a nice tri axle trailer. If the boat don't sell in two weeks I'll probably part it. What would u give for them?
#8
Registered
Joined: Mar 2003
Posts: 2,497
Likes: 4
From: PA/MD
OMC rated the 1988 King Cobra 460 @ 340hp (and that was at the flywheel). Judging from your pics on ebay they have stock intakes, stock carbs, stock ignition, stock exhaust, and factory paint with plenty of "Patina" if you will. My guess would be that these engine are stock.



