pin cleats and k plane pins and parts
12-09-2012 | 05:24 PM
#1
Thread Starter
Registered
Joined: Jan 2007
Posts: 2,104
Likes: 1,224
From: Murrayville Georgia
pin cleats and k plane pins and parts
cleaning out the garage. I have 3 pins for 1/2" deck pin cleats.
two are from Rex Marine and have a large top washer, the other is stamped Lockwell on it . $25 each plus shipping
also have two K plane pins that have the shank and treads on the end to hold a plastic cable end for the indicator. they are 1/2" diameter, 4.5" between the mounting nuts. one end then steps to 1/4" for the cable end. $40 plus shipping.
also have a set of Stainless Marine cable ends and bolts for indicators. these replace the nut on one end of the k plane pin and have a delron cable end. $40 plus shipping.
I can send pics if needed. feel free to ask any questions.
thanks
steve schmidt
[email protected]
two are from Rex Marine and have a large top washer, the other is stamped Lockwell on it . $25 each plus shipping
also have two K plane pins that have the shank and treads on the end to hold a plastic cable end for the indicator. they are 1/2" diameter, 4.5" between the mounting nuts. one end then steps to 1/4" for the cable end. $40 plus shipping.
also have a set of Stainless Marine cable ends and bolts for indicators. these replace the nut on one end of the k plane pin and have a delron cable end. $40 plus shipping.
I can send pics if needed. feel free to ask any questions.
thanks
steve schmidt
[email protected]
12-09-2012 | 05:39 PM
#2
Platinum Member
Joined: May 2012
Posts: 11,448
Likes: 3,981
From: Midwest & T-Rock
12-10-2012 | 05:10 PM
#4
Registered
Joined: Feb 2011
Posts: 88
Likes: 0
From: Utah
12-10-2012 | 07:34 PM
#6
Platinum Member
Joined: Dec 2002
Posts: 2,195
Likes: 2
From: Dallas, TX
12-16-2012 | 07:46 PM
#9
Registered
Joined: Oct 2006
Posts: 1,109
Likes: 11
From: Baltimore, MD
12-16-2012 | 09:40 PM
#10
Thread Starter
Registered
Joined: Jan 2007
Posts: 2,104
Likes: 1,224
From: Murrayville Georgia
Can see pics of indicator end please [email protected]
thanks
steve
