Hydromotive Q-IV Intimidator 27P Set
#3
Registered
Joined: Oct 2011
Posts: 6
Likes: 0
From: Colorado Springs Co.
I have a few questions for you on the props. What kind of shape are they in? What kind of work was done on them? Did they have any damage? Have they ever been welded on? Why are you parting with them?
Thank You for your time.
Jim
Thank You for your time.
Jim
Last edited by 47OverKill; 03-09-2013 at 02:20 PM.
#4
Thread Starter
Registered

Joined: Jan 2001
Posts: 371
Likes: 0
From: Topeka, KS USA
They were purchased to see how they compared to the labbed Bravo 1's on my boat now- the 27 Hydros were the as tested props for my boat new. They did not perform as expected- were "off" by 200-300 rpm from one another. Sent them to Hydromotive and it turns out someone had the cup taken out of one of them. I had Hydromotive "match" them as stock 27's put an edge on them and polish them up- everything but lab them. Invoice was over $400. No damage and they are shiny and sharp. I have about $1200 in the pair or so- the labbed Bravos ran out dead on spec wise with the "stock" Hydros, so no reason to keep them. Moving on next project. I cannot seem to post pics, but happy to e-mail or txt them to you.
#5



