Assembling my 502 engine now and hope to get it on the dyno next week. 850 mighty demon carb on an air gap intake with a 1" spacer. 320cc aluminum heads gasket matched to the big fel-pro intake and bowl blended. Cam is .612 lift 114LSA with the 4/7 and 2/3 swap firing order. Probe pistons 10.2-1 CR on H-beam 6.385 rods.

Dyno operator has EGT for all exhaust ports so tuning will be fairly straight forward but I was wondering if anybody has gone down this road before and would be willing to help out. Hoping for around 550HP and upwards of 600ft/lbs torque........ TIA. TBF