89 imp elaganza rebuild with homemade bolster seats
04-03-2013 | 08:28 AM
#1
Thread Starter
Registered
Joined: Apr 2013
Posts: 19
Likes: 0
From: Tulsa ok
89 imp elaganza rebuild with homemade bolster seats
New to the form Iv started rebuilding my imp. Iv built all new pannels and bolster seats. When I bought the boat it was missing the cuddy cabin door does any one know what the door looked like originally I'm trying to build something but don't really know where to start. Ill post up some pics as I go along with this.
04-04-2013 | 05:07 PM
#2
Registered
Joined: Feb 2012
Posts: 4,031
Likes: 10
From: westville, NJ
i had an 86. if i find my old pic file i will let you know. there was an 89 about 10 miles up the street from me in s. jersey. i will have to go look. google imp eleganza and click the images . it looks like a bi-fold smoked or black plexi door with a teak border about inch and a quarter.
Last edited by dereknkathy; 04-04-2013 at 05:16 PM.
04-06-2013 | 03:05 PM
#4
Registered
Joined: Aug 2005
Posts: 296
Likes: 0
From: Northern, NY
1987 IMP 31 FT ELEGANZA NO MOTORS is this the same. [email protected]
Last edited by ext2gtx; 04-06-2013 at 03:08 PM.
04-06-2013 | 04:53 PM
#5
Registered
Joined: Nov 2006
Posts: 974
Likes: 4
From: Boca Raton, FL
04-07-2013 | 07:23 PM
#7
Registered
Joined: Jan 2011
Posts: 3,066
Likes: 8
From: Ocala, Fl
04-08-2013 | 10:16 AM
#8
Thread Starter
Registered
Joined: Apr 2013
Posts: 19
Likes: 0
From: Tulsa ok
04-08-2013 | 12:58 PM
#9
Registered
Joined: Dec 2010
Posts: 783
Likes: 22
From: Chestertown, MD
If I can figure out how to post I will post my pics later tonight of my 87 IMP eleganza. Full Gafrig setup controls etc... I will also be changing my dash setup as most IMP's are crooked. Good to see some are still out there!
04-08-2013 | 01:38 PM
#10
Thread Starter
Registered
Joined: Apr 2013
Posts: 19
Likes: 0
From: Tulsa ok
Cool if u can't get them to upload I will give my email I would lie to see how you have done everything. What length is your imp?
