1 set GIL/MerCruiser polished tail pipes 4" HP500 NEW
10-23-2013 | 03:51 PM
#5
Registered
Joined: Dec 2011
Posts: 317
Likes: 0
From: Lake Washignton
10-24-2013 | 04:20 PM
#6
Thread Starter
Registered
Joined: Jan 2006
Posts: 27
Likes: 0
From: CHICAGO
Sending pics to those that asked.
Pipes are 4" OD, length is 25 1/4" from outside edge of the 4 bolt flange to the bottom edge of the outlet as measured flat on the ground.
From the ground to the highest edge the pipes are 7 1/2" tall. At the outlet they are 1/2" off the ground.
Part numbers engraved on tailpipes are #818495 A1.
Pipes are 4" OD, length is 25 1/4" from outside edge of the 4 bolt flange to the bottom edge of the outlet as measured flat on the ground.
From the ground to the highest edge the pipes are 7 1/2" tall. At the outlet they are 1/2" off the ground.
Part numbers engraved on tailpipes are #818495 A1.
