Bravo XR Trim Indicator Help Needed
06-24-2013 | 05:57 AM
#1
Thread Starter
Registered
Joined: Jun 2013
Posts: 690
Likes: 308
From: Clearwater, FL
Bravo XR Trim Indicator Help Needed
Hi all,
I have a Velocity 280 with the new generation Bravo XR and the trim indicator is stuck in the up position and doesn't move with the drive. The drive trims up and down fine, I just want the gauge to work as its a new to me boat and I'm still learning how to drive it. Any help is greatly appreciated.
Also on a less important side note, when the boat is off and I trim the drive up to tow, the trim pump reverbs through the subwoofers, any thoughts there? When it comes to electrical/wiring, I'm lost.
I have a Velocity 280 with the new generation Bravo XR and the trim indicator is stuck in the up position and doesn't move with the drive. The drive trims up and down fine, I just want the gauge to work as its a new to me boat and I'm still learning how to drive it. Any help is greatly appreciated.
Also on a less important side note, when the boat is off and I trim the drive up to tow, the trim pump reverbs through the subwoofers, any thoughts there? When it comes to electrical/wiring, I'm lost.
Last edited by Stuckonstupid; 06-24-2013 at 06:03 AM.
