Cam advise
07-05-2013 | 09:33 PM
#1
Thread Starter
Registered
Joined: May 2013
Posts: 76
Likes: 0
From: Saint Cloud FL
Cam advise
My old nickerson custom grind cam. .597 LIFT With [email protected] Intake [email protected] Exh
Worked well for a long time! (Almost 10 years) But now its time for a bigger cam, most boost and more power
Boat has stainless marine manifolds on it, whats the biggest cam i can install while not running into reversion issues? I would also like to turn as many RPMS as possible. Engine builder said motor is ready to rev to 7,000 if needed.
With the prop and power im guessing i will be around 6000-6100
Worked well for a long time! (Almost 10 years) But now its time for a bigger cam, most boost and more power
Boat has stainless marine manifolds on it, whats the biggest cam i can install while not running into reversion issues? I would also like to turn as many RPMS as possible. Engine builder said motor is ready to rev to 7,000 if needed.
With the prop and power im guessing i will be around 6000-6100
Last edited by Mtuned; 07-06-2013 at 07:46 AM.
