CMI etops
10-28-2013 | 11:36 AM
#1
Thread Starter
Registered
Joined: Jan 2005
Posts: 159
Likes: 0
From: New Orleans, LA
CMI etops
I just picked up a set of cmi etop SS exhaust for my boat. My question is how can I tell which tail pipe clamps I will need? I do not have the tail pipes yet since I will be using these on my play jet boat and will need to get a set of s bend tailpipes made. The mating surface is not flat. It has about 1/4" of tube which stick out. Thanks
