22 classic with trs
#3
Registered
Joined: Aug 2005
Posts: 6,306
Likes: 1
From: Between A Womans Leggs in IL
#4
Registered

Joined: Feb 2011
Posts: 222
Likes: 10
From: Lapeer Michigan
Sorry for the tread Hi jack
#6
Registered
Joined: Aug 2005
Posts: 6,306
Likes: 1
From: Between A Womans Leggs in IL
worked great on my friend jon's 20 cig...he had a 406 with a trs,,he also had a high x and a raised hatch..that drive put him rite where he needed to be,,that was over 10 yrs ago,,he also ran a 14'' dia. prop..
#7
Registered
Joined: Oct 2005
Posts: 5,825
Likes: 612
From: Clarkston, Michigan
The 22s like a higher X/shorty lower so don't sell that Bravo 1 yet. I agree with the Mirage+ if running deep enough to bite. Don't know about the speed with your set-up but these hulls respond well to hp. Several are running over 100, many are running in 90s. Mine does 83-85.
#8
Stock Bravo 1 props don't work great on these type hulls.
I'd try a 3 blade Merc Mirage, Mirage plus, or Turbo 1.
I'm running a 4 blade Merc Rev 4 with great luck. The Rev 4 is similar to the Mirage in dia and blade design only with 4 blades. May be worth a try...
I'd try a 3 blade Merc Mirage, Mirage plus, or Turbo 1.
I'm running a 4 blade Merc Rev 4 with great luck. The Rev 4 is similar to the Mirage in dia and blade design only with 4 blades. May be worth a try...
__________________
Patrick
Patrick
Last edited by Pat McPherson; 11-08-2013 at 12:16 PM.
#9
Registered
Joined: Aug 2005
Posts: 6,306
Likes: 1
From: Between A Womans Leggs in IL
Carl c ,,aka thirdchild ^^^^ ran like 85 mph with his 22 and a 4 blade brovo one 4 blade prop so i would have to say that that info is incorrect ..sorry.
#10
Registered
Joined: Oct 2005
Posts: 5,825
Likes: 612
From: Clarkston, Michigan



