FS: Arizona Speed and Marine “Short Runner” Extrude Honed lower intake BBC mpi
11-27-2013 | 12:45 PM
#1
Thread Starter
Registered
Joined: Dec 2011
Posts: 317
Likes: 0
From: Lake Washignton
FS: Arizona Speed and Marine “Short Runner” Extrude Honed lower intake BBC mpi
GENVI 502 MAG mpi AZ Speed and Marine Extrude Honed "short runner" lower intake manifold with fuel rail and injectors. An Extrude Honed intake manifold is essential when extracting the most HP and Torque out of your MPI or Magnum EFI engine. The stock lower intake becomes the major limiting factor when upgrading cam shafts.
I purchased this for a build but we decided to go to a Carb set-up. The sale would include the new style fuel rail and injectors. $850 for everything. Please PM me for more details. I have included a picure of the intake below and a stock one to compare.
"The intake manifold was precision CNC machined to unshroud the intake runners and shape the inlet. It was then Extrude Honed to further increase airflow. The reduction in overall runner length extends the RPM range of the engine, for increased HP and Torque."
http://azspeed-marine.com/meshrumaco.html
I purchased this for a build but we decided to go to a Carb set-up. The sale would include the new style fuel rail and injectors. $850 for everything. Please PM me for more details. I have included a picure of the intake below and a stock one to compare.
"The intake manifold was precision CNC machined to unshroud the intake runners and shape the inlet. It was then Extrude Honed to further increase airflow. The reduction in overall runner length extends the RPM range of the engine, for increased HP and Torque."
http://azspeed-marine.com/meshrumaco.html
Last edited by MCKILLOP; 11-27-2013 at 01:03 PM.
