went at Active thunder shop today!
12-27-2013 | 11:03 PM
#1
Thread Starter
Registered
Joined: Jun 2004
Posts: 8,216
Likes: 572
From: St-Hyacinthe, quebec, canada
went at Active thunder shop today!
On vacation in the area, so I figured I had to stop!
Met with the owner Pat. I want to thank him to take the time to show me around and discuss different things. I had never ever seen an Active Thunder boat up close.
nice looking boat, and the overall finish is A-1! Also met Ken, as he was working on a brand new 33 footer for the boat show in febuary! if ever you have a chance, stop by!
Pat is easy to speak with and give great information! some pictures to follow!
Met with the owner Pat. I want to thank him to take the time to show me around and discuss different things. I had never ever seen an Active Thunder boat up close.
nice looking boat, and the overall finish is A-1! Also met Ken, as he was working on a brand new 33 footer for the boat show in febuary! if ever you have a chance, stop by!
Pat is easy to speak with and give great information! some pictures to follow!
12-28-2013 | 06:52 AM
#3
Forum Regulator
Joined: May 2001
Posts: 24,203
Likes: 1,592
From: Worldwide
12-28-2013 | 05:42 PM
#6
Thread Starter
Registered
Joined: Jun 2004
Posts: 8,216
Likes: 572
From: St-Hyacinthe, quebec, canada
[ATTACH=CONFIG]515340[/ATTACH][ATTACH=CONFIG]515341[/ATTACH][ATTACH=CONFIG]515342[/ATTACH][ATTACH=CONFIG]515343[/ATTACH][ATTACH=CONFIG]515344[/ATTACH][ATTACH=CONFIG]515345[/ATTACH]here we go!
12-28-2013 | 11:48 PM
#7
Ginger or Mary Ann?
Joined: Oct 2000
Posts: 11,030
Likes: 9
From: L
Isn't that awkward to shift with the levers located on the left hand side? 
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
12-29-2013 | 01:39 AM
#10
Forum Regulator
Joined: May 2001
Posts: 24,203
Likes: 1,592
From: Worldwide
Something else which is a part of a custom boat build/builder. We put on what the customer asks for; based on collective experience(s). The boat runs fine with either 280 or 380, but this boat will be on some ocean and large body runs/events and the 380s are the right choice per power, load, speed, etc. etc.
Say for example, the owner had a short slip/garage/whatever; we'd set the boat up without ITS, 280 tabs, and a stubby platform; and dial it in just the same. The drives on this boat are going to be awesome as well.
Say for example, the owner had a short slip/garage/whatever; we'd set the boat up without ITS, 280 tabs, and a stubby platform; and dial it in just the same. The drives on this boat are going to be awesome as well.
