Hey guys. I have some problems/questions about my setup. I have a Magic 29' Wizard with a 502 mag mpi and a bravo drive. 24p bravo one. 450HP 5,050 RPM @ WOT. 62 MPH @ WOT. My motor was rebuilt about 20 hrs ago and now has alot more power as well as the rev limiter set at 5,600 RPM. One main problem with my setup is that i am not getting the RPM that i need. another problem is that the boat lifts extremely high at WOT. So high that if i cut the throttle at high speed and a comfy trim level the boat wants to walk off on me really bad. I know this is a solid boat with lots of fresh power but i need some help getting the power out of the prop and to the water!