E top headers, best place to purchase?
#1
Thread Starter
Registered
Joined: Apr 2013
Posts: 19
Likes: 0
From: Breaux Bridge
just like the title says, my headers on my 07 lightning 38' are junk and one set is not repairable
thinking about doing E-tops and new tails canceling out the silent choice
looking on where to buy and get the best deal
thanks in advance for your help
thinking about doing E-tops and new tails canceling out the silent choice
looking on where to buy and get the best deal
thanks in advance for your help
#4
Registered
Joined: Sep 2002
Posts: 1,943
Likes: 0
From: Manhasset, NY
#8
The CMI GenX is a direct replacement for the Mercury Racing Sweeper header on your 600SCi. It has better primary length tuning and proper construction in the collector like the newer sport tubes.
There would be no performance benefit from new tails, since the silent choice has through transom already. But maybe you just want to clean up the bilges appearance a bit and I get that!
Eric here would be your best contact to get the best prices and fastest service on everything you need
Dont ask for me unless you want to get talked into 800EFI cams and new ECU Programs!
John Teague
There would be no performance benefit from new tails, since the silent choice has through transom already. But maybe you just want to clean up the bilges appearance a bit and I get that!
Eric here would be your best contact to get the best prices and fastest service on everything you need
Dont ask for me unless you want to get talked into 800EFI cams and new ECU Programs!

John Teague
#9
Registered

Joined: Mar 2008
Posts: 3,613
Likes: 375
From: Traverse City MI
He's and easy sale..........His drag car makes up to 2000hp and runs in the 6 sec 1/4 mile range!
Looking forward to the day his offshore boats start out performing his cars....
I think Teague is a good place to start!
Looking forward to the day his offshore boats start out performing his cars....
I think Teague is a good place to start!
#10
Thread Starter
Registered
Joined: Apr 2013
Posts: 19
Likes: 0
From: Breaux Bridge
I did have a conversation with Eric, great guy by the way and offered loads of help, looks like I will purchase new genX headers through him.....
Got the motors out and will be doing top ends on them as well, I'll adress the drives a little later
John, I'm sure we'll talk in the near future about what we can do to upgrade these babies.....lol
Got the motors out and will be doing top ends on them as well, I'll adress the drives a little later
John, I'm sure we'll talk in the near future about what we can do to upgrade these babies.....lol




