Cigarette 20 Exterior Hardware Replacement - Lift Bow/Stern lift Ring Hook-ups
#1
Thread Starter
Registered
Joined: Sep 2008
Posts: 18
Likes: 0
From: Warren, Michigan
Recently purchased a 1975 Cigarette 20. The two hoist lift rings on the bow and stern are tarnished. I was told at a marina that they screw on and off. I would like to purchase new chrome lift rings to improve the appearance of the boat. Can anyone help me with the name of a supplier that would carry these chrome lift ring parts so I can contact them and purchase two of them.
Thank you
George
Thank you
George
#2
Registered
Joined: Mar 2006
Posts: 673
Likes: 12
----Theres a good chance that they were made right in Algonac Mi. by "Algonac Cast Products". Look them up. They have slowed way down since the death of the owner but they seem to be carrying on and they sometimes have a bunch of old stock on old items. Good people!!!.....Bill S
#3
Registered

Joined: Aug 2001
Posts: 919
Likes: 12
From: OPKS & LOTO
Let us know what you find out from the olredalert contact.
Also, if you can't find anything from them, they could likely be re-chromed. I went the re-chroming route on my Cig 20 original hatch hinges and bow light. 4 hinges and the bow light ran about $200.
Also, if you can't find anything from them, they could likely be re-chromed. I went the re-chroming route on my Cig 20 original hatch hinges and bow light. 4 hinges and the bow light ran about $200.



