Smith Brothers/CRC 611 to utilize DriveGuardian by MDC.
04-07-2014 | 08:11 AM
#1
Thread Starter
Registered
Joined: Feb 2007
Posts: 946
Likes: 1
From: Franconia, PA
Smith Brothers/CRC 611 to utilize DriveGuardian by MDC.
Smith Brothers Offshore Racing Team Announces Technical Alliance
Smith Brothers Offshore Racing Team announced today that they have formed a technical alliance with Marine Design Corporation of Cary, Illinois. MDC is the designer and manufacturer of the DriveGuardian. DriveGuardian is a patent pending device designed to absorb and dissipate the shock-induced loading of the gear sets and shafts in a marine drive system and eliminate the damage from overloading. DriveGuardian’s design controls the maximum torque seen by the drive with zero impact or adverse effects under normal operation. Importantly, as designed, DriveGuardian’s operation is 100% mechanical, operates automatically, is completely transparent to the boat operator, and requires no additional maintenance.
“We are thrilled to be working with Mike Clesceri the designer of the DriveGuardian,” said team throttleman Rich Smith. “We rebuilt our drive after last season and found a twisted vertical shaft and chipped gears, all signs of overstressing the drive. Mike’s invention is designed to eliminate the immense stress put on the drive when running a boat in the rough conditions we race in.”
The team will be installing a DriveGuardian calibrated for their engine package immediately and will run the unit the entire Offshore Powerboat Association season.
For more information on Marine Design Corporation and the DriveGuardian see their website at www.marinedesigncorp.com
For more information on Smith Brothers Offshore Racing Team see www.smithbrothersoffshoreracing.com
Smith Brothers Offshore Racing Team announced today that they have formed a technical alliance with Marine Design Corporation of Cary, Illinois. MDC is the designer and manufacturer of the DriveGuardian. DriveGuardian is a patent pending device designed to absorb and dissipate the shock-induced loading of the gear sets and shafts in a marine drive system and eliminate the damage from overloading. DriveGuardian’s design controls the maximum torque seen by the drive with zero impact or adverse effects under normal operation. Importantly, as designed, DriveGuardian’s operation is 100% mechanical, operates automatically, is completely transparent to the boat operator, and requires no additional maintenance.
“We are thrilled to be working with Mike Clesceri the designer of the DriveGuardian,” said team throttleman Rich Smith. “We rebuilt our drive after last season and found a twisted vertical shaft and chipped gears, all signs of overstressing the drive. Mike’s invention is designed to eliminate the immense stress put on the drive when running a boat in the rough conditions we race in.”
The team will be installing a DriveGuardian calibrated for their engine package immediately and will run the unit the entire Offshore Powerboat Association season.
For more information on Marine Design Corporation and the DriveGuardian see their website at www.marinedesigncorp.com
For more information on Smith Brothers Offshore Racing Team see www.smithbrothersoffshoreracing.com
04-07-2014 | 09:26 AM
#3
Registered
Joined: Mar 2012
Posts: 4,189
Likes: 55
From: Cape coral, FL
This is very good and should give good feedback and reliability for the new product. Best way to get it out there is a give a few to some race teams who can report back and either help improve or talk it up where the average joe will be buying them
10-30-2014 | 10:16 AM
#5
Thread Starter
Registered
Joined: Feb 2007
Posts: 946
Likes: 1
From: Franconia, PA
We are very happy with the unit after a hard season of racing on the OPA tour. Our old set up without the Drive Guardian saw our vertical shaft twisted. With the Drive Guardian, after an inspection of the lower unit before the OPA Worlds, all was good.
Rich
Smith Brothers/CRC 611
Rich
Smith Brothers/CRC 611
