I have for sale 2 complete Sets of Edelbrock Performer RPM Aluminum heads. 1 set is the marine version (means basically have a black coating and the other version is the Performer RPM. They are both the same exact head. They have the Inconnell exhaust vales, Manley severe duty 2.25 intake valves, PAC Springs, the heads have had race valve jobs and alot of pocket porting. The hardware on the heads at most have 10 hours on them. $1400 per set plus freight. They are 118CC's & the heads are all assembled and ready to go. Any questions or pictures call me at 708-670-7288 Joe

https://www.facebook.com/#!/photo.ph...type=1&theater

tt

ttt

tttt

What kind of performance gain would be expected with these over stock 088 rectangular port heads?

quite a bit... max flow out of an 088 fully prepped and ported would be 308 cfm... those would be 340++out of the box, so I'd say a modest 50 hp at least

not to mention the weight saving.

Hmmm.......this has my attention now.

Still have them guys, they are worth every penny especially for those of you running HP500's

Please tell me more.....I have not lost interest but just unexpectedly spent a couple thousand on a lost engine hatch, brackets, hinges, and actuator.

Talk me into taking money out of the bank...