NT 3600 props spinng in or out?
#2
Registered
Joined: Jun 2013
Posts: 27
Likes: 0
From: Maryland
Mine spin out 36 supercat with 750's. She has incredible manners around the dock and handles gret at speed never gets loose. There is another post on here about this that somebody said if below 800 hp then spin in over that than out but I'm not sure any I've never tried mine spinning in.
#3
Registered

Joined: Mar 2006
Posts: 96
Likes: 0
From: Eagle mountain lake, TX
I've tried spinning in and out with a couple different props and found that spinning in is more stable. this is with about 1300hp twin turbo engines and #6 drives. when spinning out the boat had a tendency to dart around more as the turbos spooled up. spinning in seems to load the motors better which makes the turbos more manageable. prior to the turbo motors the boat was stable and faster spinning out.



