Go Back  Offshoreonly.com > Technical > General Q & A
Looking for some real out of the box thinking.... >

Looking for some real out of the box thinking....

Notices

Looking for some real out of the box thinking....

Thread Tools
 
Old 11-04-2014 | 08:04 PM
  #1  
Thread Starter
Registered
 
Joined: Aug 2007
Posts: 2,960
Likes: 7
From: Sandown, NH - Sebago Lake Region, ME
Default Looking for some real out of the box thinking....

So here is the scenario. I have an 84 scarab with TRS's and I have a set of kaama drives that I really really want to put on the boat. My issue is that I am having no luck finding twin disc transmissions (without spending a fortune) so I am wondering if there are any other options? This is where the out of the box thinking comes in. I am not afraid of having to engineer something that works. Believe me I am far from one of those guys that needs everything to bolt up like a factory install or it can't be done. Unfortunately I don't know enough about the different types of transmissions out there that could maybe be retrofitted into a boat. I know the twin disc are unique in the fact that they can run full power in either direction. I can't imagine that this is the only transmission capable of this?

Anybody have any ideas?

Remember "out of the box thinking is what I am looking for"!

Thanks in advance!

Jim
502ss is offline  
Reply
Old 11-04-2014 | 08:21 PM
  #2  
Registered
15 Year Member
 
Joined: Aug 2010
Posts: 1,384
Likes: 565
Default

Powerglides?
cheech is offline  
Reply
Old 11-04-2014 | 08:29 PM
  #3  
Thread Starter
Registered
 
Joined: Aug 2007
Posts: 2,960
Likes: 7
From: Sandown, NH - Sebago Lake Region, ME
Default

Originally Posted by cheech
Powerglides?
Don't know a lot about them other then they are still popular in mud trucks and race cars. I am not sure you can put full power to the reverse? Maybe the reverse is a different ratio also?
502ss is offline  
Reply
Old 11-04-2014 | 09:19 PM
  #4  
Registered
 
Joined: Oct 2012
Posts: 1,332
Likes: 2
From: dfw texas
Default

The 72's have been beefed up to handle some girthy hp loads ,flip the pump cover for different rotation needs ,cheap enough you could prob keep a spare in boat somewhere .b&m made some.mini trans like the blactrac back in day outside that its lenco ,ect .should be a interesting project
airjunky is offline  
Reply
Old 11-05-2014 | 10:42 AM
  #5  
Thread Starter
Registered
 
Joined: Aug 2007
Posts: 2,960
Likes: 7
From: Sandown, NH - Sebago Lake Region, ME
Default

Originally Posted by airjunky
The 72's have been beefed up to handle some girthy hp loads ,flip the pump cover for different rotation needs ,cheap enough you could prob keep a spare in boat somewhere .b&m made some.mini trans like the blactrac back in day outside that its lenco ,ect .should be a interesting project
Are you saying you can flip the pump and the transmission will run in the opposite direction? Can you run full power like that?
502ss is offline  
Reply
Old 11-05-2014 | 10:58 AM
  #6  
Registered
 
Joined: Sep 2010
Posts: 98
Likes: 0
From: Fort Walton Bch. FL.
Default

The pump direction on 72s is determined by motor rotation, the counter rotation is in the gear reduction not the pump.
raisingkane is offline  
Reply
Old 11-05-2014 | 12:35 PM
  #7  
Registered
 
Joined: Jul 2009
Posts: 8,527
Likes: 706
From: Taunton Ma
Default

When a 72 is used on a counter rotating engine you need to flip the pump. What you need is a drop box reduction gear. I believe there were some made for velvet drives. Also look into the Walter machine company. They make the most compact vee drives and drop boxes I've seen.
Unlimited jd is offline  
Reply
Old 11-05-2014 | 01:11 PM
  #8  
Registered
 
Joined: Oct 2012
Posts: 1,332
Likes: 2
From: dfw texas
Default

Brain fart my end ,flip pump for opposite rotation engines .unusual in BBC world .yea if you need gear reduction and low drive centerline its going to be more difficult .may need to flip motors around and have a v drive surface drive scarab .would definetly be outside the box .
airjunky is offline  
Reply
Old 11-05-2014 | 01:24 PM
  #9  
Steve H's Avatar
artselectricinc.com
25 Year Member
Platinum Member
 
Joined: Dec 2000
Posts: 703
Likes: 27
From: Longview, WA, USA
Default

I will be replacing a pair of Twin Discs mg502 1.5 to 1 ratio with new ZFs sometime after the first of the year. I don't know what they are worth, but if you are interested I would part with them.

They work fine, except under hard throttle they will slip. The issue did not appear until I replaced the 415hp BBC engines with 500hp BBC engines. My boat weighs over 18,000lbs when loaded. I'm guessing there would be no issue in a lighter boat. I have been running it like this for over 150 hours with out any other problems, just have to be careful not to horse it on plane. This boat is a 42' Sport Fish with Arnesons.

Let me know

Steve

Last edited by Steve H; 11-06-2014 at 05:08 PM.
Steve H is offline  
Reply
Old 11-05-2014 | 03:40 PM
  #10  
Registered
15 Year Member
 
Joined: May 2010
Posts: 996
Likes: 189
From: Red Oak, Texas
Default

Velvet drive?
CDShack is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.