Bravo 1 trim question
08-30-2002 | 05:05 PM
#1
Thread Starter
Charter Member#1205
Joined: Feb 2001
Posts: 75
Likes: 0
From: fast scarab, usa
Bravo 1 trim question
I have a bravo 1 trim switch question:
1988 bravo 1 , two sets of wires come from the trim limi and sending assemblies, thru the transom housing to the
trim power unit. One set on mine goes to a purple wire connector and a blue &blue/white stripe combo connector.
The other set coming from the bravo is not hooked up and I do not know where to hook it, I think this set comes from the starboard side and feeds the trim gauge.
When I had the 96 502 put in the guy left it like this and I do not have my manual up here where I have the boat.
Any help would be great.
Terry
1988 bravo 1 , two sets of wires come from the trim limi and sending assemblies, thru the transom housing to the
trim power unit. One set on mine goes to a purple wire connector and a blue &blue/white stripe combo connector.
The other set coming from the bravo is not hooked up and I do not know where to hook it, I think this set comes from the starboard side and feeds the trim gauge.
When I had the 96 502 put in the guy left it like this and I do not have my manual up here where I have the boat.
Any help would be great.
Terry
Thread
Thread Starter
Forum
Replies
Last Post
1BIGJIM
Drives and Lower Units
3
06-10-2008 12:46 PM
