Gauging interest morel lifters crane 651 cams and springs
12-04-2014 | 10:50 AM
#1
Thread Starter
Registered
Joined: Jul 2009
Posts: 8,527
Likes: 706
From: Taunton Ma
Gauging interest morel lifters crane 651 cams and springs
Putting a feeler out, 2 sets of 4603 lifters with 10 hours on them
2 crane 651 cams non step nose .632/.632 244/256 114 lsa
2 sets of valve springs for above, iirc they were 170 lbs at 1.880? That number may be off a bit.
$1500 for everything. I have several sets of .080 pushrods if I have what you need after install you can have them.
2 crane 651 cams non step nose .632/.632 244/256 114 lsa
2 sets of valve springs for above, iirc they were 170 lbs at 1.880? That number may be off a bit.
$1500 for everything. I have several sets of .080 pushrods if I have what you need after install you can have them.
