BBC short blocks, long blocks parts 454, 509, afrs
01-09-2015 | 10:27 AM
#1
Thread Starter
Registered
Joined: Jul 2009
Posts: 8,527
Likes: 706
From: Taunton Ma
BBC short blocks, long blocks parts 454, 509, afrs
Cleaning out my garage to jump on a deal I came across.
I have everything to put together at least 2 complete engines, and a complete Mrd motor.
1. complete Mrd 454, 177 blower with superchiller, 990 heads hyd flat tappet cam. $4000 obo
2. gen 6 509 short block, je flat top pistons, scat h beam rods, gm crank, less than 5 hours on it. $3000
3. gen 5 509 short block 150 hours, needs refresh been sitting nothing damaged $1500
4. gen 5 454 .030 over 2399 pistons 7/16 rods, forged crank, 5 hours on it, got trash in main bearings. $800
5. 2 sets of afr 305 heads with cnc chambers, 5 hours on valve job and springs. $4000 for both sets
6. hp 500 intakes have been epoxied and powder coated red $300 pair
7. 2 1000 cfm 4150 carbs new last year from pro systems cost over $1700, $1000
8. msd 6m2 ignitions, pro billet dist, with complete merc harness $450 ea complete
9. gen 5/6 raw water pump with fuel pump, upgraded 170 gph pumps $300 ea
10. hollry strip dominator oval port intakes like new chrome powdercoat $200 pair
11. crane 651 cams $200 ea
12. morel lifters 5 hours of run time $550 ea set
14. gen 5/6 10 qt hardin extreme pans like new $400 ea with dipstick and oil pumps
15. je 4.500 bore pistons, mini dome +1cc $250
16. scorpion 1.7 rocker arms $200
17. scorpion 1.8 rocker arms $200
18. Custom ground lunati cams 663/680 265/275 114 $200 eA
19. Imco valve covers $300 for 4
will add more and pics later.
[email protected] for pics or details.
will sell all for package price
I have everything to put together at least 2 complete engines, and a complete Mrd motor.
1. complete Mrd 454, 177 blower with superchiller, 990 heads hyd flat tappet cam. $4000 obo
2. gen 6 509 short block, je flat top pistons, scat h beam rods, gm crank, less than 5 hours on it. $3000
3. gen 5 509 short block 150 hours, needs refresh been sitting nothing damaged $1500
4. gen 5 454 .030 over 2399 pistons 7/16 rods, forged crank, 5 hours on it, got trash in main bearings. $800
5. 2 sets of afr 305 heads with cnc chambers, 5 hours on valve job and springs. $4000 for both sets
6. hp 500 intakes have been epoxied and powder coated red $300 pair
7. 2 1000 cfm 4150 carbs new last year from pro systems cost over $1700, $1000
8. msd 6m2 ignitions, pro billet dist, with complete merc harness $450 ea complete
9. gen 5/6 raw water pump with fuel pump, upgraded 170 gph pumps $300 ea
10. hollry strip dominator oval port intakes like new chrome powdercoat $200 pair
11. crane 651 cams $200 ea
12. morel lifters 5 hours of run time $550 ea set
14. gen 5/6 10 qt hardin extreme pans like new $400 ea with dipstick and oil pumps
15. je 4.500 bore pistons, mini dome +1cc $250
16. scorpion 1.7 rocker arms $200
17. scorpion 1.8 rocker arms $200
18. Custom ground lunati cams 663/680 265/275 114 $200 eA
19. Imco valve covers $300 for 4
will add more and pics later.
[email protected] for pics or details.
will sell all for package price
Last edited by Unlimited jd; 01-09-2015 at 05:32 PM.
