Skater 32A ON SALE, HALF OFF, BUY ONE GET A BEER FREE
03-24-2015 | 02:54 PM
#1
Thread Starter
Registered
Joined: Dec 2013
Posts: 903
Likes: 1
From: East Texas Waterfront- running errands if anyone asks
Skater 32A ON SALE, HALF OFF, BUY ONE GET A BEER FREE
Now that I have your attention....She's gotta' GO!!!!!
http://www.offshoreonly.com/classifi...o61257-en.html
http://www.offshoreonly.com/classifi...o61257-en.html
03-25-2015 | 01:34 PM
#3
Thread Starter
Registered
Joined: Dec 2013
Posts: 903
Likes: 1
From: East Texas Waterfront- running errands if anyone asks
The 300XS motors would be a good choice. Easy on gas and around 95-100mph depending on setup with 2.
3 XS's should get you to mid to high teens.
2 of The new 400's would be very interesting, and this boat could handle the weight.
3 XS's should get you to mid to high teens.
2 of The new 400's would be very interesting, and this boat could handle the weight.
03-26-2015 | 10:26 AM
#4
Registered
Joined: Jan 2001
Posts: 2,292
Likes: 20
From: Grand River, Ohio
What about 300 Verado. What length mid-section? As you can see I'm an I/O guy but am trying to learn and come over to the dark side. I think the 32A would be a good entry level cat for up here on Lake Erie. If I could run in the 90's I would be happy to start.
03-26-2015 | 11:02 AM
#5
Thread Starter
Registered
Joined: Dec 2013
Posts: 903
Likes: 1
From: East Texas Waterfront- running errands if anyone asks
I have no idea with the 300 Verados. I would think 90 would be possible. 20 inch mids are the norm.
The original owner of this boat was a MI boater. 2nd owner was at Lake Cumberland KY with very little use. Boat has been in storage since 2003.
I have not found any signs on the boat or trailer that this rig has ever been in salt. Very good condition.
The original owner of this boat was a MI boater. 2nd owner was at Lake Cumberland KY with very little use. Boat has been in storage since 2003.
I have not found any signs on the boat or trailer that this rig has ever been in salt. Very good condition.
