cooler questions
#1
Thread Starter
Gold Member
Joined: Aug 2006
Posts: 115
Likes: 0
From: Westchester ,NY
My question is this:
357 formula
Trs drives rebuilt 10-18
502 motors
And full hydo steering
I had coolers in the bell housings. They are bad. I have two mercury factory log style coolers for the tranys that I can mount on the left side of the motors far from the sea pumps... Can I mount one more combo style power steering/ oil log style right after the sea pump or mount them all on one side .
Any input would be helpful. Thanks Jim
357 formula
Trs drives rebuilt 10-18
502 motors
And full hydo steering
I had coolers in the bell housings. They are bad. I have two mercury factory log style coolers for the tranys that I can mount on the left side of the motors far from the sea pumps... Can I mount one more combo style power steering/ oil log style right after the sea pump or mount them all on one side .
Any input would be helpful. Thanks Jim
#3
Thread Starter
Gold Member
Joined: Aug 2006
Posts: 115
Likes: 0
From: Westchester ,NY
Thanks for the info ... So if I understand this correctly one cooler each side of the block... As for the boat it was last registered in nh however it has a Maryland title ... Looking to drop this in the later water mid June..
#4
Registered
Joined: Dec 2004
Posts: 3,194
Likes: 5
From: hampstead nh
You will find a batt cable missing for 1. Of the motors



