Go Back  Offshoreonly.com > Offshoreonly Marketplace > Swap Shop
I have 2 454/502 MPI mag  set ups Complete with vst fuel pumps . >

I have 2 454/502 MPI mag set ups Complete with vst fuel pumps .

Notices

I have 2 454/502 MPI mag set ups Complete with vst fuel pumps .

Thread Tools
 
Old 06-22-2015 | 09:27 AM
  #1  
Thread Starter
Registered
15 Year Member
 
Joined: Mar 2007
Posts: 936
Likes: 9
From: New Jersey
Default I have 2 454/502 MPI mag set ups Complete with vst fuel pumps .

just took this off my motors ran great in great shape .. Im asking 650 per side or 1200 for the pair or best offer Thanks robert
excalibur82 is offline  
Reply
Old 06-23-2015 | 07:32 AM
  #2  
Thread Starter
Registered
15 Year Member
 
Joined: Mar 2007
Posts: 936
Likes: 9
From: New Jersey
Default

I also have roller lifters with the dog bones and hold down tray from both motors with 200 hours . 140 for both sets plus the ride. Thanks Roberrt
excalibur82 is offline  
Reply
Old 06-24-2015 | 01:46 PM
  #3  
Thread Starter
Registered
15 Year Member
 
Joined: Mar 2007
Posts: 936
Likes: 9
From: New Jersey
Default

Offers?
excalibur82 is offline  
Reply
Old 06-24-2015 | 02:04 PM
  #4  
SBX
Registered
 
Joined: Mar 2011
Posts: 167
Likes: 0
From: Beaumont TX
Default

What all is included? Upper/lower, fuel rail injectors, distributor, MEFI?, harness??
SBX is offline  
Reply
Old 06-24-2015 | 02:09 PM
  #5  
Thread Starter
Registered
15 Year Member
 
Joined: Mar 2007
Posts: 936
Likes: 9
From: New Jersey
Default

comes with everything you need distributors injectors fuel pumps wiring harness. upper and lower intakes and it is mefi 1. They have 200 hours on them and all the sensors . plug and play
excalibur82 is offline  
Reply
Old 06-24-2015 | 02:46 PM
  #6  
fantastixvoyage's Avatar
Platinum Member
20 Year Member
Platinum Member
 
Joined: Jul 2003
Posts: 3,219
Likes: 1
From: Michigan
Default

These are for rectangular port heads correct?
fantastixvoyage is offline  
Reply
Old 06-24-2015 | 03:01 PM
  #7  
Thread Starter
Registered
15 Year Member
 
Joined: Mar 2007
Posts: 936
Likes: 9
From: New Jersey
Default

yes 454/502 mag set up
excalibur82 is offline  
Reply
Old 06-24-2015 | 03:16 PM
  #8  
Registered
15 Year Member
 
Joined: Dec 2007
Posts: 370
Likes: 2
From: New Jersey
Default

How bad is the corrosion on the lower intake water block off area?
jvcobra is offline  
Reply
Old 06-24-2015 | 03:29 PM
  #9  
Thread Starter
Registered
15 Year Member
 
Joined: Mar 2007
Posts: 936
Likes: 9
From: New Jersey
Default

it had the block off gaskets and they are good shape one side has alittle but not bad at all I will take pics if you want.
excalibur82 is offline  
Reply
Old 06-24-2015 | 08:48 PM
  #10  
Registered
15 Year Member
 
Joined: Dec 2007
Posts: 370
Likes: 2
From: New Jersey
Default

Yes please, send to [email protected]
jvcobra is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.