I have a carb that came off a 315 horse 350 vortec crate motor. The throttle blades measure the same as the 750 edelbrock carb ( 1 11/16") but jetting is different, and there are "tangs" riveted to the booster on the primary side. I assume this is to balance out flow. This is how the carb came meaning it hasn't been molested. The number (where 1409/1410 would be stamped on an edelbrock) is:

9736S 0104

Does anyone know where I can find the specs on this carb?

Thanks

No one? I thought I remembered seeing some specs to these. They are jetted much leaner than the edelbrocks.

Maybe I should try the hull truth.....

That's a Carter #. But, that's all I have for you.

Thanks, this carb went great on a 315 horse votec 350 pushing a 23.5 foot wellcraft to 52. Had since been torn apart by a moron and I have no idea what he did, looks like he didn't touch the jetting but I'll find out. Got a rebuild kit on the way. This is for my friend on a budget and we are going from a 260 horse to a 315ish horse vortec

Doesnt come back as a oe weber listing for merc i would split the specs between the 9761 lx 5.7 and the and the 9780 bbc peanut bravo dial it. From there

Was probably a tournament ski boat app.