#5 drives, gimbals, Stellings box's
10-29-2015 | 09:29 PM
#1
Thread Starter
Platinum Member
Joined: Oct 2000
Posts: 1,057
Likes: 29
From: Santa Barbara CA. USA
#5 drives, gimbals, Stellings box's
2ea. second design 1.48 ratio #5SSM drives with polished lowers and under 10 hours of pleasure boat, fresh water running time. Just look at their condition and you can tell they have low low hours. They also have 1" spacers installed and if you choose not to need the spacers I will supply studs to remove the spacers and you can take them back to their original height.These drives ($9900ea, I realize that this a lot of $$$ for a #5 but these are the most perfect set of #5's that I have seen in 10 years. You do not need to do anything to them. You can buy cheaper drives but you may have to replace upper and lower gears and possibly bearings and maybe propshafts and after you pay a qualified drive expert you will have way more invested than if you had bought these and just bolted them on your boat) and gimbals ($3500ea) are as close to new as you will ever find. The original Mercury assembly stickers are still on both the drives and gimbals. Drives are #OL001903 and OL001940 and the gimbals are #OL001961 and OL001962. Competition trim pumps go with the gimbals. I also have a set of Mercury 17.5x28 4bbl props ($1800ea). The Stellings box's ($3000ea) are complete with the internal bearing carriers and one of the last sets manufactured by Stellings. They have a Mercury over flow bottle attached to the bearing carrier. A complete Latham steering system ($3500) with stainless brackets, cylinders, tie bar and transom mounts. I'm open to reasonable offers. Call and lets talk. All prices do not include shipping.
Last edited by RMPRam; 10-30-2015 at 06:29 PM.
