I have a new set of Brodix BBC heads for sale. They have only
been run twice on the dyno on my 496 motor. I think the 365
runners are too much for this motor and I need 320-335cc runners.
They have been professionally ported and flow close to 6-8% better then CNC
porting. The heads have a total of 20minutes on them! I just want the correct heads
on this build!
I will consider a trade, but they must be oval ports and in top condition
Pictures are available via phone text.
No decking or cutting of the spring seats. Just porting.
Perfect for a 520ci motor up to 632 with shaft mounted rockers.
bowls are 119cc. valves are intake: 2.350 exhaust: 1.880
Installed height of the springs are 1.950
$3500. complete, less rockers
Cheers, Steve
[email protected] 949-748-0705
I will be away Feb 16 Tues. only

You may offer up a trade for the right heads also. There's always people going bigger cubes resulting larger runners etc. on my 496's I have pro 310's and work well.

Thanks getrdunn. I should have gone the smaller rout. My loss will be someone els's gain.

Who ported the heads? What cubic inch / rpm were the heads ported for?