33 outlaw cable lengths
#1
Thread Starter
Registered

Joined: Mar 2012
Posts: 1,230
Likes: 27
From: Clearwater, Mn
Dose any one know the correct cable lengths for the throttle (port and star) and the shift cable lengths? I know it is a long shot but never know. What the best ones are out there. Im guessing Teleflex?
I would like to pre order my cables for this spring install. Trim tab and drive indicator cable lengths wouldn't hurt either.
I would like to pre order my cables for this spring install. Trim tab and drive indicator cable lengths wouldn't hurt either.
#3
I did this on my 33.....Im pretty sure they are, BTW your current ones are marked
Starboard tab 21'
drive 24
Port drive 26'
tab 28'
I didn't replace my throttle cables but I would guess, 24 starboard & 27 port
Edit: found this from another OSO thread
So I pulled my cables and here's the lengths. Maybe the next guy wanting to change his sees this.
Shifters: port 24'/starboard 21'
Throttles: port 23'/starboard 20'
Drives: port 26'/starboard 26'
Tabs: port 27'/starboard 21'
Don't know why the shifters are a foot longer than the throttles on both sides but they're all going longer so I can route them with the tabs I like the way those 2 arrived at the helm. Also gaffrig doesn't do odd numbers so I need all evens.
Starboard tab 21'
drive 24
Port drive 26'
tab 28'
I didn't replace my throttle cables but I would guess, 24 starboard & 27 port
Edit: found this from another OSO thread
So I pulled my cables and here's the lengths. Maybe the next guy wanting to change his sees this.
Shifters: port 24'/starboard 21'
Throttles: port 23'/starboard 20'
Drives: port 26'/starboard 26'
Tabs: port 27'/starboard 21'
Don't know why the shifters are a foot longer than the throttles on both sides but they're all going longer so I can route them with the tabs I like the way those 2 arrived at the helm. Also gaffrig doesn't do odd numbers so I need all evens.
Last edited by F-2 Speedy; 02-25-2016 at 07:58 AM.




