How to tint white gelcoat?
#1
Thread Starter
Registered

Joined: Feb 2001
Posts: 591
Likes: 7
From: Saugerties, NY
I have a 2001 baja outlaw. I'm repairing a couple of small spots of gelcoat. The Gelcoat I have is just too white. What colors should I use to darken the white just a little? My boat has really seen very little sun, so I would say it's not very yellowed, if at all. I just need to tone down the white a little. Any tips would be greatly appreciated.
#2
Registered
Joined: Jun 2010
Posts: 392
Likes: 0
From: Birmingham, AL
I have just been through this. Get the patch paste from Spectrum, who are the original gel suppliers to Baja.
http://spectrumcolor.com/ProductDesc...C-01-08&key=it
It is a perfect match for polished gel coat. If you haven't buffed the boat in a while it may not match, but will when you clean the boat up.
http://spectrumcolor.com/ProductDesc...C-01-08&key=it
It is a perfect match for polished gel coat. If you haven't buffed the boat in a while it may not match, but will when you clean the boat up.



