short version, boat is at broker, broker has buyer, after sea-trial starboard up power trim hose decides it wants to leak inside bilge. sale on hold

i'm out of town, back up plan if broker cannot pull mechanic out of hat is,
order hose 6-6-16 ship to broker, leave 6-9-16 for home and complete repair myself.

trying verify if part number 1 and 2 on link is LONG hose which is what i need

https://www.perfprotech.com/mercury-...120?model=1583

thank you for any assistance

1995 4.3 gen2 alphas

#1 and #2 are the two hoses which are used inside the boat. To remove them you have to remove the manifold which all the outside trim lines connect to on the bottom of the gimble assembly. Pull the manifold down and you will see those lines connected to it.

If it's leaking inside its either #1 or #2 gray or black they are different colors for a reason.