Offshoreonly.com

Go Back  Offshoreonly.com > Offshoreonly Marketplace > Swap Shop
Gil bravo lenght dry tails fit merc center riser manifold >

Gil bravo lenght dry tails fit merc center riser manifold

Register
FAQ
Calendar
Today's Posts
Search
Vendor Directory
Notices

Gil bravo lenght dry tails fit merc center riser manifold

Thread Tools
 
Old 08-30-2016 | 08:24 AM
  #1  
28cigarettess
Thread Starter
Registered
15 Year Member
 
Joined: Oct 2009
Posts: 406
Likes: 1
From: South Jersey
Default Gil bravo lenght dry tails fit merc center riser manifold
Have 4 Gil tailpipes to bolt right on to Merc center riser manifolds. Cheap way to get dry tails. 3' diameter. Some scratches. Could use a good polishing. Some minor surface discoloration towards the ends. One pipe pitted through the bottom next to the weep hole. $800.00 plus the ride.
Attached Thumbnails Gil bravo lenght dry tails fit merc center riser manifold-20160829_144209_resized.jpg   Gil bravo lenght dry tails fit merc center riser manifold-20160829_144215_resized.jpg   Gil bravo lenght dry tails fit merc center riser manifold-20160829_144221_resized.jpg  

Gil bravo lenght dry tails fit merc center riser manifold-20160829_144350_resized.jpg   Gil bravo lenght dry tails fit merc center riser manifold-20160829_144420_resized.jpg  
28cigarettess is offline  
Reply
0
Old 09-16-2016 | 10:44 AM
  #2  
28cigarettess
Thread Starter
Registered
15 Year Member
 
Joined: Oct 2009
Posts: 406
Likes: 1
From: South Jersey
Default
ttt
28cigarettess is offline  
Reply
0
Old 10-06-2016 | 08:05 AM
  #3  
28cigarettess
Thread Starter
Registered
15 Year Member
 
Joined: Oct 2009
Posts: 406
Likes: 1
From: South Jersey
Default
ttt
28cigarettess is offline  
Reply
0
Old 10-07-2016 | 06:28 PM
  #4  
murfman
Registered
 
Joined: Jul 2006
Posts: 583
Likes: 1
From: Frankfort IL
Default
What is the bolt pattern and dimensions of the base plate? I am looking to mod something for Chrysler manifolds.
murfman is offline  
Reply
0
Old 10-08-2016 | 12:29 AM
  #5  
28cigarettess
Thread Starter
Registered
15 Year Member
 
Joined: Oct 2009
Posts: 406
Likes: 1
From: South Jersey
Default
Originally Posted by murfman
What is the bolt pattern and dimensions of the base plate? I am looking to mod something for Chrysler manifolds.
Will measure and let you know.
28cigarettess is offline  
Reply
0
Old 10-12-2016 | 09:25 PM
  #6  
28cigarettess
Thread Starter
Registered
15 Year Member
 
Joined: Oct 2009
Posts: 406
Likes: 1
From: South Jersey
Default
3.5 inches center to center front to back and 3 inches across
28cigarettess is offline  
Reply
0
Old 10-12-2016 | 09:26 PM
  #7  
28cigarettess
Thread Starter
Registered
15 Year Member
 
Joined: Oct 2009
Posts: 406
Likes: 1
From: South Jersey
Default
Base plate is 4 1/2 by 4
28cigarettess is offline  
Reply
0
Old 11-15-2016 | 11:47 PM
  #8  
28cigarettess
Thread Starter
Registered
15 Year Member
 
Joined: Oct 2009
Posts: 406
Likes: 1
From: South Jersey
Default
bump
28cigarettess is offline  
Reply
0
Old 11-30-2016 | 07:13 PM
  #9  
28cigarettess
Thread Starter
Registered
15 Year Member
 
Joined: Oct 2009
Posts: 406
Likes: 1
From: South Jersey
Default
ttt
28cigarettess is offline  
Reply
0
Old 12-30-2016 | 08:00 PM
  #10  
28cigarettess
Thread Starter
Registered
15 Year Member
 
Joined: Oct 2009
Posts: 406
Likes: 1
From: South Jersey
Default
going up
28cigarettess is offline  
Reply
0



Advanced Search

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.