353 - New in-Dash GPS thoughts?
#1
Thread Starter
Registered

Joined: Aug 2013
Posts: 479
Likes: 20
From: Lake St. Clair, MI
I'll be refinishing my 353 helm this winter. Was wondering if anyone has done this already and been able to fit a decent GPS into the main dash panel, without losing the electric gages. My boat came with the Garmin 130, which likely hasn't worked in years, or the screen has aged to the point you can't see anything on it anymore.
I don't have smartcraft, as that would make it easy.
Please share any pics of your project!
Thanks,
Eric
I don't have smartcraft, as that would make it easy.
Please share any pics of your project!
Thanks,
Eric
#4
Registered
Joined: Mar 2009
Posts: 2,053
Likes: 0
From: Cape Coral, Fl/LOTO
Innotech in St. Louis, talk to Steve, they have most of the patterns for Formula's or you can ship him yours and he can make it off of that, if I remember right for all three pieces of dash was around $350 bucks.
#6
Thread Starter
Registered

Joined: Aug 2013
Posts: 479
Likes: 20
From: Lake St. Clair, MI
Bad monkey, that looks pretty wicked. What year is that, which GPS?
That may be the same place I sent my 280 panels, a lady namedMichelle hooked me up on piano black for that dash.
That may be the same place I sent my 280 panels, a lady namedMichelle hooked me up on piano black for that dash.
#7
Registered

Joined: Jul 2007
Posts: 139
Likes: 0
From: Armada, Mi
Snowrunner, you still working on this over the winter?
I was playing with mine some and thought about leaving all the gauges but ditching the speedo, it isn't even gps!
Here is what I think will work. The Simrad seems to fit the space that I was able to carve out.
https://drive.google.com/open?id=0B4...2Ztc19mYjE1V3c
Here is the current setup
https://drive.google.com/open?id=19X...0Q4D76SEZEvYsQ
I will need to call Innotech. I might see if they will share the drawing of the main dash panel so I can play with it somemore.
I was able to draw a 8 x 4.25 rectangle in the middle of the dash with the way I arranged the dash in the 1st picture.
-Dave
I was playing with mine some and thought about leaving all the gauges but ditching the speedo, it isn't even gps!
Here is what I think will work. The Simrad seems to fit the space that I was able to carve out.
https://drive.google.com/open?id=0B4...2Ztc19mYjE1V3c
Here is the current setup
https://drive.google.com/open?id=19X...0Q4D76SEZEvYsQ
I will need to call Innotech. I might see if they will share the drawing of the main dash panel so I can play with it somemore.
I was able to draw a 8 x 4.25 rectangle in the middle of the dash with the way I arranged the dash in the 1st picture.
-Dave
Last edited by D2HP; 01-25-2017 at 08:30 PM.
#10



