Who makes parts or fittings to adapt to the bravo gimbal assembly so I can extend my water connection and my trim lines. I just installed my IMCO extension box and I need a little extra to make all these work. Thanks

Got the water line figured out with a plate and a nipple and extended water line. The Trim lines I guess I'll have to make up my own with adapters at the transom assembly and then use AN line and change the fittings at the pump.

Extend them. They should be 3/16 reverse flare

Got it figured out. After some searching they are 3/8-24 inverted flare fittings. Thanks