s022mag

My swim platform is extremely slippery when it's wet. I do a lot of rafting off and have seen more then one person fall in with clothes on. Is there anyone else with a 38ZX that's has a slippery one also and what can I do to it to give it some grip and still look original.

hotjava66

I used some clear 3m non skid in a spray bomb for showers etc. Taped off so it is in strips, works great rough enough for grip but fine on bare feet.

s022mag

Is it noticeable ¿

hotjava66

A little, it's clear but the grit in it makes it show some. Not too noticeable being in strips and worth it for what it does. I literally hurt myself several times slipping on the freshly painted aluminum, it was slick as ice when wet.

Diamond Dave

GatorStep/ SeaDek if its a flat molded in one.

http://www.gatorstep.com/

http://www.seadek.com/

Wilks

I used hydro turf on my 38zx

90viper

iTrader: (1)

[ATTACH=CONFIG]565193[/ATTACH]
Seadek on my 38. They did awesome job soft and put Donzi in it

90viper

iTrader: (1)

I will get better photo

VoodooRob

I would go Seadek or go on Fleabay, there are some suppliers selling rolls of the same type of material

bblythe

[ATTACH=CONFIG]565241[/ATTACH] seadeck