I have 2 525EFI with 3 hours on them since complete build. Motors were stock 525s with 180hrs on them at time of build, Stage 3 Whipple kits with dual core inter-coolers. They were put in the boat and test run and put about 1 hour on them. Boat was delivered to customer and ran for 2 hours at best. The gentlemen ran into some life changing problems the same week he took delivery of the boat and needed the money he spend on the the build for other reasons. I bought the motors from him for my boat and I have just decided to take a break from my powerboat this season. I have not put them in the boat yet. If they dont sell in the next two weeks, I may put them in just to get them out of my floor.

I dont have all the specs on the motors, I can put you in contact with the builder for any tech questions you may have on them. I do know they made right at 850hp,.

Asking $60K for the pair plus shipping, pick up would be preferred. Complete drop in turn key ready to go. Price 2 stock 525s with less than 5hrs and then 2 stage 3 Whipple kits out. $60k is a steal drop in ready.

I will post pics shortly, but can text them anytime.

If motors sell, I will have 2 very low hour IMCO SCX -4's for sale as well.

Call or text 252 Three Three Three 5898


Thanks
Brad

I would be interested in the SCX Uppers unless you are describing SCX4's?

What's the stage 3 whipple kit vs stage 2?

How much for one of the SCX -4
what prop shaft?

How much for both drives if you sell sir? Thank you.

Hey guys, thanks for the responses. Drives are not for sale unless motors sell.

Thanks
Brad