Wtd 7.1" steel rods to suit BBC
07-25-2017 | 06:08 PM
#1
Thread Starter
Registered
Joined: May 2007
Posts: 240
Likes: 2
From: Mt Martha Australia
Wtd 7.1" steel rods to suit BBC
Looking for a set of 7.1" I- beam or H-Heam rods to suit 3.1" stroke 9.8" std deck BBC
Looking to build < 405ci BBC using 4.5/3.1, or 4.56/3.1
Please pm
Brett
Looking to build < 405ci BBC using 4.5/3.1, or 4.56/3.1
Please pm
Brett
08-04-2017 | 05:01 AM
#3
Thread Starter
Registered
Joined: May 2007
Posts: 240
Likes: 2
From: Mt Martha Australia
actually thats good question
I have 4.5" Dia low comp pistons, 8.0 and 11.5 + comp pistons, and have the crank (one piece) so looking to connect the two together, and throw short block together
figure if I found the steel rods, worst case, would upgrade bolts to AP2000
if could make 750hp happy with that
I have 4.5" Dia low comp pistons, 8.0 and 11.5 + comp pistons, and have the crank (one piece) so looking to connect the two together, and throw short block together
figure if I found the steel rods, worst case, would upgrade bolts to AP2000
if could make 750hp happy with that
08-04-2017 | 03:33 PM
#7
Thread Starter
Registered
Joined: May 2007
Posts: 240
Likes: 2
From: Mt Martha Australia
Yes have a 3.1 stroke Gen VI Bryant crank
adk61: can you send us some pic, information of what you have, [email protected]
cheers
Brett
adk61: can you send us some pic, information of what you have, [email protected]
cheers
Brett
