Originally built by Ron Sprol Performance

Scat Crank shaft, Oliver I beam rods, Roller Rockers, Canfield Aluminum Heads, 12qt oil pan, Merlin Intake and 1 inch carb spacer.

Includes bell housing, Flywheel and HP Bravo Coupler

100% Fresh Professional Rebuild, Ready to Dress and Install

Comes as shown in pictures

$6200 plus shipping

Photos and more info in link: https://fortmyers.craigslist.org/lee...463124705.html

239-443-8233

Open to reasonable offers!

ttt

Still available!

TTT AJ, How many hours? Thanks Howard

Zero Hours, this motor was rebuilt a few years ago and never run since. Not sure of original hours but I was told it was low.

Just been sealed with rockers loosened and occasionally rotated. Needs to be filled with oil, primed, dressed out and installed!

ttt

What is the compression ratio and did Ron Sprol rebuild the motor or someone else? What components are new? Also is this a standard deck height motor - hard for me to tell from photos. Thanks.

Standard deck, compression is about 9:1, not sure of exact but built to run on pump gas. Rebuild was done by Dennis from Kinetic Racing Engines.

ttt