Konrad conversion TRS staggard sucsess
03-05-2018 | 01:02 AM
#1
Thread Starter
Registered
Joined: Oct 2000
Posts: 1,094
Likes: 57
From: Deland, Fl
Konrad conversion TRS staggard sucsess
Well a few months of rigging and sea trial yesterday was killer. Rooster tail does not lie.
same motors for 10 years now in front of Konrads so i know what changed. Steering the same, on rails. Now have rooster. Lol
Gained 3 miles an hour with same old setup.
Now come the 700hp next per mill.
That should enlighten my Bertram 38.
Any questions how to rig staggard Konrads.
pm me your number and we can chat.
B38
same motors for 10 years now in front of Konrads so i know what changed. Steering the same, on rails. Now have rooster. Lol
Gained 3 miles an hour with same old setup.
Now come the 700hp next per mill.
That should enlighten my Bertram 38.
Any questions how to rig staggard Konrads.
pm me your number and we can chat.
B38
03-05-2018 | 11:37 AM
#3
Platinum Member
Joined: May 2012
Posts: 11,438
Likes: 3,964
From: Midwest & T-Rock
Well a few months of rigging and sea trial yesterday was killer. Rooster tail does not lie.
same motors for 10 years now in front of Konrads so i know what changed. Steering the same, on rails. Now have rooster. Lol
Gained 3 miles an hour with same old setup.
Now come the 700hp next per mill.
That should enlighten my Bertram 38.
Any questions how to rig staggard Konrads.
pm me your number and we can chat.
B38
same motors for 10 years now in front of Konrads so i know what changed. Steering the same, on rails. Now have rooster. Lol
Gained 3 miles an hour with same old setup.
Now come the 700hp next per mill.
That should enlighten my Bertram 38.
Any questions how to rig staggard Konrads.
pm me your number and we can chat.
B38
03-05-2018 | 07:16 PM
#5
Thread Starter
Registered
Joined: Oct 2000
Posts: 1,094
Likes: 57
From: Deland, Fl
Konrad made a Extreme 3" cresent lower shorty. A few are out there. Like to find a pair and try 3" verses the current XP 2" now. All good though, I'm happy.
Last edited by B38; 03-05-2018 at 07:17 PM. Reason: Spelling error
