Just so there is no confusion on what this hull derived from, it is a 24 Skater copy. We purchased the 24 Skater copy molds from Black Wolf Racing. Per Black Wolf, they had permission from Pete at Skater to make copy molds. Either way, they are no longer in production and have been out of production per the time frame required to be exempt of the Splash Laws, so per the Splash Laws, it is legal to copy them. Just to nip that in the butt.

Black Wolf made a few changes from the original 24 Skater and I am sure we will make more if we continue to build them.

George D. and I have discussed this for a while and we decided if we got 4 guys together, we would build them. George got 4 guys and made this happen. So you will see 4 of these coming out of the mold this year. Most of these are going overseas, as George and his friends are from the Turks and Caicos Islands. You will see one here in the US, but it is going to be more towards winter.

George's 24 is all white and he will be doing the paint, rigging and interior on his end.

The bottom is now currently in the foam core stage and almost ready for the final layers of glass and structural work. Thanks Todd

nice work

Very stand-up of you Todd to mention that your 24 started life as a 24 Skater. No worries about it bothering Pete any, he destroyed the 24 molds about 3 years ago.

Around $40k bare hull. Thanks Todd

Great work, please show more pics

The 24 bottom is out of the mold.

Good Luck with the 24's - Great hull that needed a driver's respect to hang them out but could handle the rough just the same.

Trimmed up a little better.