37 step hull only on craigslist $4900
03-27-2018 | 05:55 PM
#1
Thread Starter
Registered
Joined: Jan 2006
Posts: 3,869
Likes: 797
From: St. Pete Beach, FL
37 step hull only on craigslist $4900
Someone buy this so I don’t. I know some of y’all were looking for a deal like this.
https://jerseyshore.craigslist.org/b...542685616.html
keep us posted how the project turns out though!
https://jerseyshore.craigslist.org/b...542685616.html
keep us posted how the project turns out though!
03-27-2018 | 06:13 PM
#3
Registered
Joined: Aug 2012
Posts: 620
Likes: 7
From: Cincinnati ohio
03-27-2018 | 06:51 PM
#4
Registered
Joined: Apr 2006
Posts: 10,041
Likes: 712
From: Toledo Oh
03-27-2018 | 06:53 PM
#5
Registered
Joined: Oct 2005
Posts: 6,215
Likes: 378
From: Plainville/Old Lyme, CT Boca Raton, FL
This was the staggered boat that rolled over. The boat then kicked around CT for sale with the Merc 600’s and bravos that were in it when it rolled over. The boat sold to the current owner, he stripped it, did the work you see done to it, and was going to put a single big diesel in it.
Last edited by 302Sport; 03-27-2018 at 08:41 PM.
03-27-2018 | 08:23 PM
#9
Forum Regulator
Joined: May 2001
Posts: 24,215
Likes: 1,613
From: Worldwide
That is definitely the staggered boat that wrecked with a drunk behind the wheel several years ago.
Some of the statements are wrong though.
And that last pic is a stolen photo of another OSO member's former boat with paint photoshop removed.
It probably would be a great outboard conversion candidate, but plan on starting from absolute scratch. Rigging it and dialing it in with engine height and setback, propshaft location, and COG calculating/adjustment (empty vs. full cabin & fuel tanks) would take FOREVER and could make for a very dangerous boat if not done right.
Some of the statements are wrong though.
And that last pic is a stolen photo of another OSO member's former boat with paint photoshop removed.
It probably would be a great outboard conversion candidate, but plan on starting from absolute scratch. Rigging it and dialing it in with engine height and setback, propshaft location, and COG calculating/adjustment (empty vs. full cabin & fuel tanks) would take FOREVER and could make for a very dangerous boat if not done right.
