WTT Stainless Marine for stock merc exhaust
04-24-2018 | 10:47 PM
#1
Thread Starter
Registered
Joined: May 2009
Posts: 69
Likes: 0
WTT Stainless Marine for stock merc exhaust
I have a pair of lightly used Stainless Marine headers and tails that were on a 24’ Python/ P&D 24/ 24 Panterra/ Jaws etc.... I am willing to trade the single engine set for a set of factory type manifolds and riser for a 454 Mag MPI in good condition. Send pics of what you have and we will work somethingb out. These won’t fit under the sun deck of my current project. Will also sell outright for $800 plus $50 shipping. Thanks.
Last edited by heavanie; 04-26-2018 at 10:20 PM. Reason: Adding details
04-25-2018 | 05:27 AM
#3
Registered
Joined: Feb 2003
Posts: 6,192
Likes: 318
From: Lafayette,La
Just put a deposit yesterday on the 540 Bulldog listed on here. it has the Mercury factory exhaust manifolds with 165 hours fresh water only through them . I am going to need 1 set of the SM marine manifolds since already have a set of dry to tip pipes and trimmings already.
I not picking up engine for a few weeks though so don't know if you are willing to wait . PM me if interested.
I not picking up engine for a few weeks though so don't know if you are willing to wait . PM me if interested.
04-25-2018 | 05:55 AM
#4
Registered
Joined: Mar 2003
Posts: 2,497
Likes: 4
From: PA/MD
I have a pair of lightly used Stainless Marine headers and tails that were on a 24’ Python/ P&D 24/ 24 Panterra/ Jaws etc.... I am willing to trade the single engine set for a set of factory type manifolds and riser for a 454 Mag MPI in good condition. Send pics of what you have and we will work somethingb out. These won’t fit under the sun deck of my current project. Thanks.
