Heat Exchanger Gaskets
#1
Thread Starter
Registered

Joined: Jul 2009
Posts: 570
Likes: 33
From: Newburgh, IN/Freeport, FL
Just a reminder for 496 owners don't forget your heat exchanger gaskets when you winterize...this was our first year with this boat so I decided to change them when I winterized so along with the impellors they would be fresh in the spring. Engines have 470 hours but I think these were the original gaskets, one was sucked in so far it had ripped and another fell apart in my hands. Luckily I had the engines back flushed when the impellors were replaced. Not sure how I made it all summer without overheating!
#3
Thread Starter
Registered

Joined: Jul 2009
Posts: 570
Likes: 33
From: Newburgh, IN/Freeport, FL
No, other than taking the boat back down for winter storage and then one more trip in November to close down the Condo we are finished for the season. We lost the bearings on one of the Hardin Marine water pumps on Sunday afternoon of Labor Day weekend and that ended our season, between sending the pumps back to Hardin for rebuild and traveling for work I just picked the boat up from Hu B's this week to clean up and winterize.




